Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

PANS-AIM requires the change over point (COP) to be encoded in case the path of the route segment(s) is a VOR radial. This is applicable only for conventional routes, i.e. for ENR 3.1 Lower ATS Routes, ENR 3.2 Upper ATS Routes and ENR 3.4 Helicopter routes.

PANS-AIM defines the COP as:

The point at which an aircraft navigating on an ATS route segment defined by reference to very high frequency omni directional radio ranges is expected to transfer its primary navigational reference from the facility behind the aircraft to the next facility ahead of the aircraft.

In AIXM 5.1.1, the ChangeOverPoint is related to a RoutePortion and not a route segment. Hence, to encode COP information, also a corresponding RoutePortion has to be encoded.

The ChangeOverPoint.distance attribute is used to define the distance from the RoutePortion.start to position of the change over point. Only the distance from the start of the route portion is encoded. The distance from the end of the route portion can be derived from the length defined by the start and end of the RoutePortion or be encoded as a Note for the ChangeOverPoint.

The ChangeOverPoint.location may be used to define the position of COP as SignificantPoint. In this regard, only Point shall be used as SignificantPoint.

Coding Rules for Change Over Point

IdentifierData Encoding RuleJustificationData Verification Rule (UID)Remarks
RSG-501The SignificantPoint used as start of the RoutePortion as ChangeOverPoint shall be either a VOR or a TACAN.Data consistencyTBD
RSG-502The SignificantPoint used as end of the RoutePortion as ChangeOverPoint shall be either a VOR or a TACAN.Data consistencyTBD
RSG-503The SignificantPoint used for the ChangeOverPoint.location shall be a Point.Data consistencyTBD
RSG-504TheĀ ChangeOverPoint.distance shall be the distance from the start of the related RoutePortion.Data consistencyTBD

Coding Examples

The figure below gives a simple example of a change over point:

More Examples TBD in the scope of the AIXM DONLON AIP data set.