Versions Compared

Version Old Version 29 New Version 30
Changes made by

Andreea Perca (Deactivated)

Andreea Perca (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Coding

Definition

...

  • AirportHeliport BASELINE as specified in the Basic Data for Airport/Heliport,

  • Runway BASELINE according to the coding rules for Basic Data for Runway;

  • Taxiway BASELINE which contains as a minimum a designator and an association with the AirportHeliport; (warning)No AIP Data Set specific rules identified.

  • Apron BASELINE which contains as a minimum a designator and an association with the AirportHeliport; (warning)No AIP Data Set specific rules identified.

...

Identifier

Data encoding rule

ER-01

The surface condition report shall be encoded as:

  • a new Event with a BASELINE TimeSlice (encoding=”DIGITAL”, scenario=”SFC.CON”, version=”2.0”), for which a PERMDELTA TimeSlice may also be provided; and

  • a TimeSlice of type TEMPDELTA for the affected Runway feature, for which the "event:theEvent" property points to the Event instance created above.

  • if applicable, additional TEMPDELTA TimeSlices for the affected Taxiway and Apron features as detailed below. Such TimeSlice shall have the "event:theEvent" property points to the Event instance created above.

ER-02

Each TEMPDELTA TimeSlice shall have TimeSlice.validTime.TimePeriod.beginPosition same as the Runway.RunwayContamination.observationTime.

ER-03

Each TEMPDELTA TimeSlice shall have TimeSlice.validTime.TimePeriod.endPosition set 8h after the beginPosition.

(Alternatives: 1) the 8h should be put as estimated end of validity or 2) the end of validity is to be an input from the operator)