Versions Compared

Version Old Version 35 New Version 36
Changes made by

Andreea Perca (Deactivated)

Andreea Perca (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Coding

Definition

...

  • AirportHeliport BASELINE as specified in the Basic Data for Airport/Heliport,

  • Runway BASELINE according to the coding rules for Basic Data for Runway;

  • Taxiway BASELINE which contains as a minimum a designator and an association with the AirportHeliport; (warning)No AIP Data Set specific rules identified.

  • Apron BASELINE which contains as a minimum a designator and an association with the AirportHeliport; (warning)No AIP Data Set specific rules identified.

...

Identifier

Data encoding rule

ER-01

The surface condition report shall be encoded as:

  • a new Event with a BASELINE TimeSlice (encoding=”DIGITAL”, scenario=”SFC.CON”, version=”2.0”), for which a PERMDELTA TimeSlice may also be provided; and

  • a TimeSlice of type TEMPDELTA for the affected Runway feature, for which the "event:theEvent" property points to the Event instance created above.

  • if applicable, additional TEMPDELTA TimeSlices for the affected Taxiway and Apron features as detailed below. Such TimeSlice shall have the "event:theEvent" property points to the Event instance created above.

ER-02

Each TEMPDELTA TimeSlice and the Event featureLifetime.beginPosition shall have TimePeriod.beginPosition same as the Runway.RunwayContamination.observationTime.

ER-03

Each TEMPDELTA TimeSlice and the Event featureLifetime.endPosition shall have TimePeriod.endPosition set 8h after the TimePeriod.beginPosition.

(Alternatives: 1) the 8h should be put as estimated end of validity or 2) the end of validity is to be an input from the operator)

ER-04

Only the following values shall be used for the RunwaySectionContamination.section:

  • 1_THIRD
  • 2_THIRD
  • 3_THIRD
ER-05

Only the following values shall be used for RunwaySectionContamination.SurfaceContaminationLayer.type:

  • COMPACT_SNOW
  • NONE
  • DRY_SNOW
  • FROST
  • ICE
  • SLUSH
  • WATER
  • DAMP
  • OTHER:WET_ICE
  • WET_SNOW
ER-06

Only the following values shall be used for Runway.overallContaminant.SurfaceContaminationLayer.type:

  • OTHER:DRIFTING_SNOW
  • OTHER:LOOSE_SAND
  • OTHER:CHEMICAL_TREATMENT
ER-07If presence of snow banks adjacent to the runway are indicated, this shall be encoded as RunwayContamination.Ridge.annotation having purpose="REMARK" and note="Snow banks present adjacent to the runway".
ER-08If the assessment is including Taxiway information, TEMPDELTA TimeSlices shall be encoded for each affected Taxiway feature. This shall include Taxiway.SurfaceCharacteristics.surfaceCondition and TaxiwayContamination.Ridge shall be encoded as part of it, as available.
ER-09If presence of snow banks on the taxiway are indicated, this shall be encoded as TaxiwayContamination.Ridge.annotation having purpose="REMARK" and note="Snow banks present on the taxiway"


ER-10If the assessment is including Apron information, TEMPDELTA TimeSlices shall be encoded for each affected Apron feature. This shall include the Apron.SurfaceCharacteristics.surfaceCondition.
ER-11

Only the following values shall be used for Runway.RunwayContamination.frictionDevice:

  • GRT
  • MUM
  • RDB
  • RFT
  • SFH
  • SFL
  • SKH
  • SKL
  • TAP