Versions Compared

Version Old Version 13 New Version 14
Changes made by

WOJTOWICZ Aleksander

POROSNICU Eduard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Text NOTAM production rules

...

Apply the common NOTAM production rules for item Q, complemented by the following specific rules for this particular scenario:

Q code

The following mapping shall be used: 

...

RDN.TD.availability.ManoeuvringAreaAvailability.

Corresponding Q code

timeIntervalusage.ManoeuvringAreaUsage

RWY.BL.type

type

operationpriorPermission../FlightCharacteristics../AircraftCharacteristics'RWY''FATO'
not NIL'PERMIT''ALL'NILNILNILQMRAHQFPAH
any'RESERVE'anyanyonly military='MIL'anyQMRAMQFPAM
any'CONDITIONAL'anynot NILanyanyQMRAPQFPAP
any'PERMIT'anyNILanyanyQMRARQFPAR
any'RESERVE'anyanyonly origin='HOME_BASED'anyQMRLBQFPLB
any'FORBID'anyanyanyweight not NILQMRLHQFPLHQFPLT
any'FORBID'anyanyrule = 'IFR'anyQMRLIQFPLI
any'CONDITIONAL'anyanyanywingSpan not NILQMRLLN/A
any'FORBID'anyanyrule = 'VFR'anyQMRLVQFPLV
any other combinationQMRLTQFPLT


Scope

Insert the value ‘A’.

Lower limit / Upper limit

Use “000/999”

Geographical reference

Insert the coordinate of the ARP (aerodrome reference point) of the airport (AHP.BL.ARP.ElevatedPoint), formatted as follows:

...

Reference

Data item (from coding scenario)

Rule

(1)


If AHP.BL.locationIndicatorICAO is not null, then ignore this branch.

(2)


Insert here the type of the airport decoded as follows

AHP.BL.type

Text to be inserted in Item E

AD or AH

"AD"

HP

"Heliport"

LS or OTHER

"Landing site"

(3)

airport name

  1. If AHP.BL.name is not NIL, then insert it here. Otherwise:

  2. insert here the text "located at" followed by the AHP.BL.ARP.ElevatedPoint decoded according to the text NOTAM production rules for aixm:Point

(4)

runway surface composition

Insert the word “unpaved” if RWY.BL.SurfaceCharacteristics.composition has one of the values 'CLAY, CORAL, EARTH, GRASS, GRAVEL, ICE, LATERITE, MACADAM, SAND, SNOW, WATER, OTHER'. Otherwise do not insert anything.

(5)

runway

Insert here the type of the Runway decoded as follows

RWY.BL.type

Text to be inserted in Item E

RWY

"RWY"

FATO

"FATO"

(6)

runway direction

If more than one RunwayDirection has a TEMPDELTA associated with the Event, then insert the designator of each additional RunwayDirection, preceded by "/", starting with the one with the lower designator number. In general, a runway has two landing directions but there may exist very rare situations with 3-4 landing directions.

(7)

conditional for

closed, except for

prohibited for

additionally allowed for

Insert here RDN.TD.availability.ManoeuvringAreaAvailability.usage.ManoeuvringAreaUsage as follows:

type

Text to be inserted in item E

"CONDITIONAL""available for"
"RESERV""closed, except for"
"FORBID""prohibited for"
"PERMIT""now available for"
(8)flight

Decode here each FlightCharacteristics property that was specified, as detailed below. If more than one FlightCharacteristics property was used, insert blanks between consecutive properties.

FlightCharacteristics.type*

Text to be inserted in Item E

OAT

"Operational Air Traffic"

GAT

"General Air Traffic"

ALL

"Operational Air Traffic/General Air Traffic"

OTHER:FREE_TEXT

"free text" (replace "_" with blanks)

*Note: type is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.rule

Text to be inserted in Item E

IFR

"IFR"

VFR

"VFR"

ALL*

"IFR/VFR"

OTHER:FREE_TEXT

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.status

Text to be inserted

HEAD

"Head of State"

STATE

"State acft"

HUM

"HUM"

HOSP

"HOSP"

SAR

"SAR”

EMERGENCY

"EMERG"

ALL

"State acft/HUM/HOSP/SAR/EMERG"

OTHER:MEDEVAC

“MEDEVAC”

OTHER:FIRE_FIGHTING

“fire fighting”

OTHER:FREE_TEXT

"free text" (replace "_" with blanks and convert to lowercase)

FlightCharacteristics.military

Text to be inserted in Item E

MIL

"MIL acft"

CIVIL

"civil acft"

ALL*

"civil/MIL acft"

OTHER:FREE_TEXT*

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.origin

Text to be inserted

NTL

"domestic"

INTL

"intl"

HOME_BASED

"home based"

ALL*

"domestic/intl"

OTHER:FREE_TEXT*

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.purpose

Text to be inserted

SCHEDULED

"scheduled"

NON_SCHEDULED

"not scheduled"

PRIVATE*

"private"

AIR_TRAINING

"training"

AIR_WORK*

"aerial work"

PARTICIPANT

"participating acft"

ALL*

"scheduled/not scheduled/private/training/aerial work/participating acft"

OTHER:FREE_TEXT*

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

(9)

aircraft

Decode here each AircraftCharacteristics property that was specified, as detailed below. If more than one AircraftCharacteristics property was used, insert blanks between consecutive properties.

AircraftCharacteristics.type

Text to be inserted in Item E

LANDPLANE

"landplanes"

SEAPLANE*

"seaplanes"

AMPHIBIAN

"amphibians"

HELICOPTER

"hel"

GYROCOPTER

"gyrocopters"

TILT_WING

"tilt wing acft"

STOL

"short take-off and landing acft"

GLIDER*

"gliders"

HANGGLIDER*

"hang-gliders"

PARAGLIDER*

"paragliders"

ULTRA_LIGHT*

"ultra lights"

BALLOON*

"balloons"

UAV*

"unmanned acft”

ALL*

"all acft types"

OTHER:FREE_TEXT

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

AircraftCharacteristics.engine

Text to be inserted in Item E

JET

"jet acft"

PISTON

"piston acft"

TURBOPROP

"turboprop acft"

ELECTRIC

“electric engine acft”

ALL

"all engine types"

OTHER:FREE_TEXT

"free text" (replace "_" with blanks)


AircraftCharacteristics.wingSpan - insert the value followed by the value of the uom attribute. Prefix with the value of AircraftCharacteristics.wingSpanInterpretation, decoded as indicated in the following table:

AircraftCharacteristics.wingSpanInterpretation

Text to be inserted in Item E

ABOVE

"acft with wingspan more than"

AT_OR_ABOVE

"acft with wingspan equal to or more than"

AT_OR_BELOW

“acft with wingspan equal to or less than"

BELOW

"acft with wingspan less than"

OTHER:FREE_TEXT*

"free text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

AircraftCharacteristics.weight - insert the value followed by the value of the uom attribute. Prefix with the value of AircraftCharacteristics.weightInterpretation, decoded as indicated in the following table:

AircraftCharacteristics.weightInterpretation

Text to be inserted in Item E

ABOVE

"acft mass heavier than"

AT_OR_ABOVE

"acft mass equal to or heavier than"

AT_OR_BELOW

"acft mass equal to or lighter than"

BELOW

"acft mass lighter than"

OTHER:FREE_TEXT*

"free text" (replace "_" with blanks)


*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

(10)

operation

Decode here the RDN.TD.availability.usage.operation as follows:

TD.usage.operation

Text to be inserted in Item E

LANDING

"for landing"

TAKEOFF

"for tkof”

TOUCHGO

"for tgl"

TRAIN_APPROACH

"for practice low approaches"

TAXIING

"for taxiing"

CROSSING

"for crossing"

AIRSHOW

"for acft participating in air display”

ALL*

"for all operations"*

*Note: if all operations are affected, then either provide the text as described above or do not provide the text at all.

(11)

PPR time

PPR details

If RDN.TD.usage.priorPermission is not NIL, then insert here the decoding of the PPR information as detailed in the following diagram:

Code Block
titleEBNF Code
collapsetrue
condition_PPR = "PPR " "RDN.TD.usage.priorPermission(11.1)" ["RDN.TD.usage.annotation(11.2)"].


Reference

Rule

(11.1)

Insert here the value of the priorPermission attribute followed by its unit of measurement decoded according to the {{text NOTAM production rules for duration}}

(11.2)

Decode here the annotation with propertyName="priorPermission" and purpose="REMARK", according to the decoding rules for annotations.

(12)


If more than one RDN.TD.availability.ManoeuvringAreaAvailability.ManoeuvringAreaUsage.type element is present, then select and decode the additional ManoeuvringAreaUsage branch consecutively.

(13)reasonIf there exists a RDN.TD.ManoeuvringAreaAvailability.annotation with propertyName="operationalStatus" and purpose='REMARK' (the reason for limitation, according to the coding rules), then translate it into free text according to the decoding rules for annotations. 

(14)

note

Annotations of RDN.TD.ManoeuvringAreaAvailability shall be translated into free text according to the decoding rules for annotations.

...