Versions Compared

Version Old Version 2 New Version 3
Changes made by

georgiana.andrei04

VLASOV Sergiy (EXT) (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

ID:

AIXM-552

target version:

AIXM 5.2

version:

1.0

last updated:

08 AUG 2022

status:

APPROVED


Table of Contents
printablefalse

Description

Attribute designator is added to DeicingArea to provide the possibility to identify more than one such area on the aerodrome.

Rationale for change

See https://aixmccb.atlassian.net/browse/AIXM-443

It was identified that more than one DeicingArea may exist on an aerodrome, which requires a clear distinction by providing a designator. Such designator is currently provided only with an annotation.

Therefore, it is proposed to add a new attribute designator of data type TextDesignatorType to address this missing data item. This will also align AIXM 5.2 with AMDB standard ED-99/DO-272.

Impact assessment

There is no impact on existing implementations as the current

Image Added

[FWD_1:1] No data mapping is necessary and no data loss occurs when data is exchanged from a system (A) that uses AIXM 5.1.

(.1) data remains fully valid against

1 for output towards a system (B) that uses AIXM 5.2

.When receiving data from AIXM 5.2 implementations, current

for input.

[BWD_MAP_LOSS] Data mapping is possible, but some data would be lost (or converted into Notes) when data is exchanged from a system (B) that uses AIXM 5.2 for output towards a system (A) that uses AIXM 5.1

(

.1

) systems will have to be able to map back the new attribute according to the mapping algorithm below

for input.

Change Proposal details

In the UML model in the DeicingArea class:

  • Add attribute:
    • designator, data type = TextDesignatorType, definition = “The textual designator of the deicing area.”

The following UML class diagram shows the new attribute:


Mapping AIXM 5.1.1 to AIXM 5.2 (forward)

Not applicable

Mapping AIXM 5.2 to AIXM 5.1.1 (backward)

The following algorithm shall be applied:

[MAPC-02] For each DeicingArea

  • Remove the designator element
  • Add an annotation.Note associated with the owner class having
  • purpose=“OTHER:BACKWARD_MAPPING”;
  • LinguisticNote.note=”designator: <value of designator>

Mapping example

(Note: for mapping test data see: https://github.com/aixm/mapping_52_511/tree/master/AIXM-xxx) 

AIXM 5.2AIXM 5.1(.1)