[2.0] [STAND.CLS] Aircraft stand - closure
Definition
The temporary "complete" closure of aircraft stand(s).
Notes:
this scenario includes the closure of one or more aircraft stands (could be all aircraft stands at the airport);
more than one aircraft stand can be included only if the closure conditions (closure exceptions) applies equally to all. Otherwise, separate STAND.CLS Events shall be encoded.
this scenario includes only a "complete" closure of an aircraft stand, a "partial" closure except for flight and/or aircraft categories or temporary addition of a supplementary restriction to the aircraft stand availability, such as "closed for aircraft heavier than..." is included in STAND.LIM scenario.
this scenario does not cover the temporary change of the operational hours of an aircraft stand;
this scenario does not cover the situation when the aircraft stand is operating normally, but subject to a reason for caution.
Event data
The following diagram identifies the information items that are usually provided by a data originator for this kind of event.
EBNF Code
input = "airport designator" ["airport name"] "aircraft stand designator" {"aircraft stand designator"} \n
"status=CLOSED" ["closure reason"] \n
"start time" "end time" [schedule] \n
[note].The table below provides more details about each information item contained in the diagram. It also provides the mapping of each information item within the AIXM 5.1 structure. The name of the variable (first column) is recommended for use as label of the data field in human-machine interfaces (HMI).
Data item | Description | AIXM mapping |
|---|---|---|
airport designator | The published designator of the airport where the aircraft stand is located, used in combination with other elements in order to identify the aircraft stand concerned. | AirportHeliport.designator |
airport name | The published name of the airport where the aircraft stand is located, used in order to identify the aircraft stand concerned. | AirportHeliport.name |
aircraft stand designator | The designator of the aircraft stand to be closed. | AircraftStand.designator |
status=CLOSED | The operational status of the aircraft stand. In this scenario, it is only possible to indicate a complete closure. | AircraftStand/ApronAreaAvailability.operationalStatus |
closure reason | The reason for the aircraft stand closure. | AircraftStand/ApronAreaAvailability.annotation with propertyName='operationalStatus' and purpose='REMARK'. Note that the property "warning" of the ApronAreaAvailability class is not used here because it represents a reason for caution when allowed to operate at the aircraft stand, not a reason for a closure. |
start time | The effective date & time when the aircraft stand closure starts. This might be further detailed in a "schedule". | AircraftStand/AircraftStandTimeSlice/TimePeriod.beginPosition, Event/EventTimeSlice.validTime/beginPosition and Event/EventTimeSlice.featureLifetime/beginPosition |
end time | The end date & time when the aircraft stand closure ends. | AircraftStand/AircraftStandTimeSlice/TimePeriod.endPosition, Event/EventTimeSlice.validTime/endPosition and Event/EventTimeSlice.featureLifetime/endPosition also applying the rules for Event with estimated end time |
schedule | A schedule might be provided, in case the aircraft stand is effectively closed according to a regular timetable, within the overall closure period. | AircraftStand/ApronAreaAvailability/Timesheet/...according to the rules for Schedules |
note | A free text note that provides further details concerning the aircraft stand closure. | AircraftStand/ApronAreaAvailability.annotation with purpose='REMARK' |
Assumptions for baseline data
It is assumed that the related ApronElement, Apron and AirportHeliport and BASELINE Timeslice covering the entire duration of the event exist. In addition the information about the aircraft stand(s) concerned by the event already exist in the form of a AircraftStand BASELINE TimeSlice, which contains as a minimum:
designator, and
an association with the ApronElement, which is associated with an Apron, which is associated with an AirportHeliport;
The data encoding rules provided in this section shall be followed in order to ensure the harmonisation of the digital encodings provided by different sources. To the maximum possible extent, the compliance with these encoding rules shall be verified with automatic data validation rules. For this purpose, the UID of the corresponding AIXM Business Rule, where applicable, appears in the first column.
Identifier / UID | Data encoding rule |
|---|---|
STAND.CLS.01 (213BD0, 1F47D0) | The temporary closure of an aircraft stand shall be encoded as a new Event with a 'BASELINE' TimeSlice (scenario='STAND.CLS', version='2.0'), for which a PERMDELTA TimeSlice may also be provided |
STAND.CLS.02 (1F5F4F, 1F4BCF) | A TimeSlice of type 'TEMPDELTA' shall be added for each affected AircraftStand feature, for which the "event:theEvent" property points to the Event instance created above; |
STAND.CLS.03 (1FFEC5) | First, all the BASELINE availability.ApronAreaAvailability (with operationalStatus='NORMAL'), if present, shall be copied in the TEMPDELTA (see Usage limitation and closure scenarios) Then, an additional availability.ApronAreaAvailability element having operationalStatus='CLOSED' shall be coded in the AircraftStand TEMPDELTA. Editorial note: there is no mistyping - ApronAreaAvailability is the actual name of the object containing information about the operational status of an AircraftStand. |
STAND.CLS.04 (1FF2A8) | If the aircraft stand closure is limited to a discrete schedule within the overall time period between the "start time" and the "end time", then this shall be encoded using as many as necessary timeInterval/Timesheet properties for the ApronAreaAvailability (with operationalStatus='CLOSED') of the TEMPDELTA Timeslice. See the rules for Event Schedules. |
STAND.CLS.05 (1F72C8) | The system shall automatically identify the 'FIR' where the AirportHeliport is located. This shall be coded as corresponding concernedAirspace property in the Event |
STAND.CLS.06 (1F7A98) | The AirportHeliport concerned by the closure shall also be coded as concernedAirportHeliport property in the Event. |
Examples
The following examples can be found on GitHub (links attached):