This topic contains only those PANS-AIM requirements relevant for a an NDB. For general PANS-AIM requirements valid for all kind of Radio navigation aids see topic Navaid [NAV] and subordinated pages.
A Non-directional radio beacon (NDB) is a low or medium frequency radio beacon, which transmits signals, whereby the pilot of an aircraft properly equipped can determine bearings and 'home in' on the station.
A Locator is an LF/MF NDB used as an aid to final approach.
For a an NDB, PANS-AIM requires some specific properties as part of the minimum AIP data set. These are
...
The diagram below shows the AIXM classes, including the relevant data types, needed to encode that information. The main class is the NDB which is a specialisation of the NavaidEquipment.
NDB Type
This information is not explicitly required by PANS-AIM. However, this information may be relevant for ARINC 424 coding.
In AIXM 5, the NDB.class attribute may carry the value; values 'ENR' for Enroute NDB, 'L' for Locator - low powered NDB used as an aid for final approach (also known as a compass locator) and 'MAR' for Marine beacon.
Enroute NDBusually NDB usually refers to the beacons that are located away from aerodromes/heliports which are used for en-route navigation.
...
An LF/MF NDB used as an aid to final approach. Note: A locator usually has an average radius of rated coverage of between 18.5 and 46.3 km (10 and 25 NM).
A number of Several beacons are listed in "official" publications with titles such as Locator (L) beacon, these . These beacons are basically the same as standard NDBs, but will have a specified Instrument Approach procedure as well. These are provided as an additional approach aid during the notified hours of operation at a particular certain aerodrome/heliport.
When a nondirectional beacon is co-located with a marker of an ILS, the terms LO , and LM generally refer to the location of the locator beacon in question, e.g. LO - at the "Outer Marker" position on the approach to the RWY, LM at the "Middle Marker" position. Sometimes these nondirectional beacons - depending on their position - are also called, "outer compass locator" or LOM and "middle marker compass locator" or LMM respectively.
...
| Tip | ||
|---|---|---|
| ||
The example below shows different types of NDBs NDBs published in ENR 4.1.
|
ARINC 424 contains 2 two dedicated record types for NDB. One for NDB NAVAID (DB), containing all LF and MF NDBs and selected Marine Beacons defined in the enroute structure, and one for the Terminal NDB (PN). Both record types contain the data field NAVAID Class (CLASS), that, inter alia, is used to distinguish between NDB, Locator and Marine Beacon (additional classification elements are part of this data field, which do not fully coincide with AIXM 5 concept, e.g. codes for high powerd powered NDB, low powered NDB, etc.).
...
In general, enroute NDB will carry a three-letter character identifier. Locator may have 2 two or one character.
The NDB.designator attribute is used to code that data.
The long name given to the DME NDB is coded using the NDB.name attribute.
| Tip | ||
|---|---|---|
| ||
The example below show and shows an en-route NDB with designator "KAM" and a Locator with designator "MG" (collocated with the Outer Marker of an ILS), published in AD 2.19.
The example below shows a an NDB published in ENR 4.1, carrying the name ARRUDA.
|
...
Magnetic Variation
For NDB, PANS-AIM Appendx Appendix 1 requires the magnetic variation to be provided. For details about the encoding including rules see the topic Magnetic Variation.
NDB Frequency
In AIXM 5, the frequency of the NDB emission is coded by using the NDB.frequency attribute.
The corresponding data type contains a uom attribute. For a an NDB, only the value equal-to 'KHZ' shall be used.
...
the radio frequencies assigned to NDBs shall be selected from those available in that portion of the spectrum between 190 kHz and 1 750 kHz.
Position
In case a an NDB (Locator) collocated with a marker is physically located at the same position as the marker, the geographic position (latitude and longitude) of the Marker is also the geographic position of the NDB.
In case a an NDB (Locator) is collocated with a Marker and the position of the NDB is different from the position of the Marker, some restrictions have to be taken into account (see coding rules for Marker Beacon).
For mor edetails more details see topic Navaid Position & Elevation.
...
See topic Facility coverage.
Navaid Collocation
A An NBD instance may be collocated with a MarkerBeacon.
A An NDB (and marker) may only maintain a single collocation relationship at a time, which means that it is not possible to collocate a NDB with two different markers.
Usually, the NBD collocated with a marker is a locator (see NDB type above), whereas the locator in conjunction with the collocated marker is used for ILS approaches.
In the AIP, collocated NDB and marker navaids are sometimes referred to as LOM, LMM or LIM, depending on marker position within the ILS.
An NDB may also be co-located with a DME.
For details about the coding and rules see topic Landing Systems & Navaid Collocation.
...