Mapping PANS-AIM AIP Data Set to AIXM 5

These pages contain the mapping of the AIP Data set subjects as defined in PANS-AIM to the attributes of the corresponding AIXM 5 features. The mapping is limited to the following data elements:

• According PANS - AIM chapter 5.3.3.1.1 the AIP data set shall include data about the following subjects, with the properties indicated in brackets being included as a minimum (if applicable):

a) ATS airspace (type, name, lateral limits, vertical limits, class of airspace);

b) Special activity airspace (type, name, lateral limits, vertical limits, restriction, activation);

c) Route (identifier prefix, flight rules, designator);

d) Route segment (navigation specification, startpoint, endpoint, track, distance, upper limit, lower limit, MEA, MOCA, direction of cruising level, reverse direction of cruising level, required navigation performance);

e) Waypoint – en-route (reporting requirement, identification, location, formation);

f) Aerodrome/Heliport (location indicator, name, designator IATA, served city, certified ICAO, certification date, certification expiration date, control type, field elevation, reference temperature, magnetic variation, airport reference point);

g) Runway (designator, nominal length, nominal width, surface type, strength);

h) Runway Direction (designator, true bearing, threshold, TORA, TODA, ASDA, LDA, rejected TODA);

i) FATO (designation, length, width, threshold point);

j) TLOF (designator, centre point, length, width, surface type);

k) Radio navigation aid (type. identification, name, aerodrome served, hours of operation, magnetic variation, frequency/channel, position, elevation, magnetic bearing, true bearing, zero bearing direction).

• In addtion also those sections which are marked with #AIP-DS# in PANS-AIM Appendix 2 "CONTENTS OF THE AERONAUTICAL INFORMATION PUBLICATION (AIP)" are taken into account. In the mapping these data elements are marked correspondingly.

• Where required (e.g. for flight planning or ARINC 424 compatibility purposes) also other additional data elements may be included in the mapping and are marked correspondingly.

References