Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Next »

This page contains the mapping for the following data items as defined in PANS-AIM, chapter 5.3.3.1.1

b) Special activity airspace (type, name, lateral limits, vertical limits, restriction, activation);

These properties which are considered as minimum AIP data set for Special activities airspace are mapped to the following main AIXM 5 features:

Besides the minimum AIP data set items, additional data items specified in the following sections of Appendix 2 of PANS-AIM - which are marked with #AIP-DS# - are taken into consideration for the mapping. In the context of this mapping, these properties are conditional AIP data set items.

  • ENR 5.1 Prohibited, restricted and danger areas
  • ENR 5.2 Military exercise and training areas and air defence identification zone (ADIZ)

  • ENR 5.3.1 Other activities of a dangerous nature
  • ENR 5.5 Aerial sporting and recreational activities

Note

"ENR 5.3.2 Other potential hazards" & "ENR 5.6 Bird migration and areas with sensitive fauna" are not marked as #AIP-DS# in the PANS-AIM.

PANS-AIMDescription (PANS-AIM)AIXM 5Remarks
Type

Type of special activity airspace

Note 1 type: Prohibited Area, Restricted Area, Danger Area, Military Execise Area, Military Training Area, Air Defence Identification Zone (ADIZ), Other

Airspace.type

Airspace.localType



The localType attribute may be used for those types for which the AIXM attribute Airspace.type does not provide a dedciated value.

Open Question

TBD: For military airspaces controlType is included in the mapping?

Besides some exceptions, AIXM does not provide dedicated type values for military airspaces (e.g. Military Training Area). Such airspaces are encoded with the corresponding controlType equal-to 'MIL'.

IdentificationThe identification assigned to uniquely identify the airspaceAirspace.designator
NameThe name given to the airspace by a responsible authorityAirspace.name
Lateral limitsThe surface defining the horizontal shape of the airspace

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume,

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume.horizontalProjection.Surface.horizontalAccuracy


Vertical limits - Upper limitThe upper limit of the airspace

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume.upperLimit,

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume.upperLimitReference


Vertical limits - Lower limitThe lower limit of the airspace

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume.lowerLimit,

Airspace.geometryComponent.AirspaceGeometryComponent.theAirspaceVolume.AirspaceVolume.lowerLimitReference


RestrictionType of restriction or nature of hazardAirspace.activation.AirspaceActivation.activity

In addtion AircraftCharacteristic may be used to define the type of restriction in more detail.

ActivationInformation on system and means of activation announcements together with information pertinent to civil flights and applicable ADIZ procedures;Airspace.annotation.Note.propertyName equal to  'activation' .translatedNote.LinguisticNote.note
Time of activityTime interval when the special activity takes placeAirspace.activation.AirspaceActivation.timeInterval
Risk of interceptionRisk of interception in the event of penetration

RulesProcedures.affectedArea,
RulesProcedures.title equal to 'INTERCEPTION_CIVIL_AIRCRAFT',

RulesProcedures.category,

RulesProcedures.content

Only required for Airsapce.type equal-to 'ADIZ'.

The property affectedArea is used to relate the concerned airspace to the rules and procedure for interception. AIXM provides a dedicated vallue for the title attribute for the interception of civil aircraft.

The remaining attributes may be used to specify the interception rules/procedures in more detail.

  • No labels