v1.0.6
SurveyControlPoint correspondence
- WILSON Scott
ED-99/DO-272 Definition: A monumented survey control point.
AIXM 5.1.1 Definition: A monumented survey control point.
In order to have a complete correspondence the following extensions are needed:
ED-99/DO-272 | A | B | C | D | AIXM 5.1.1 | AIRM 1.0.0 | |
|---|---|---|---|---|---|---|---|
SurveyControlPoint | x | x | x | x | SurveyControlPoint | urn:aero:airm:1.0.0:LogicalModel:Subjects:AirspaceInfrastructure:InfrastructurePoint:InfrastructurePoint urn:aero:airm:1.0.0:LogicalModel:Subjects:AirspaceInfrastructure:Codelists:CodeInfrastructurePointUsageType@SURVEY_CONTROL_POINT | |
| 1 | stfeat | x | x | featureLifetime.gml:TimePeriod.gml:beginPosition | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@startEntityLifetime | ||
| 2 | endfeat | x | x | featureLifetime.gml:TimePeriod.gml:endPosition | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@endEntityLifetime | ||
| 3 | stvalid | x | x | validTime.gml:TimePeriod.gml:beginPosition | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@startValidity | ||
| 4 | endvalid | x | x | validTime.gml:TimePeriod.gml:endPosition | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@endValidity | ||
| 5 | interp | x | x | interpretation | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@interpretation | ||
| 6 | feattype | x | x | x | x | Note: Can be implied | |
| 7 | idnumber | x | x | x | identifier | urn:aero:airm:1.0.0:LogicalModel:Abstract:Entity@identifier | |
| 8 | idarpt | x | x | x | x | associatedAirportHeliport.AirportHeliport.locationIndicatorICAO | urn:aero:airm:1.0.0:LogicalModel:Subjects:BaseInfrastructure:AerodromeInfrastructure:Aerodrome@locationIndicatorICAO |
| 9 | idsurv | x | x | x | x | designator | urn:aero:airm:1.0.0:LogicalModel:Subjects:Common:Geometry:SignificantPoint@designator |
| 10 | vacc | x | x | x | x | location.ElevatedPoint.verticalAccuracy | urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:ThreeDimensionalPointType@verticalAccuracy |
| 11 | hacc | x | x | x | x | location.ElevatedPoint.horizontalAccuracy | urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:ThreeDimensionalSurfaceType@horizontalAccuracy |
| 12 | vres | x | x | x | x | location.ElevatedPoint.verticalResolution | urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:ThreeDimensionalCurveType@verticalResolution |
| 13 | hres | x | x | x | x | location.ElevatedPoint.horizontalResolution | urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:ThreeDimensionalPointType@horizontalResolution |
| 14 | source | x | x | x | x | source | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@source |
| 15 | integr | x | x | x | x | integrity | |
| 16 | revdate | x | x | x | x | revisionDate | urn:aero:airm:1.0.0:LogicalModel:Abstract:TemporalEnabledEntity@lastRevision |
| 17 | coord | x | x | x | x | annotation.Note[propertName='location', purpose='DESCRIPTION'].translatedNote.LinguisticNote.note It seems that this attribute in ED99 is intended to contain a published/rounded value for a survey control point, as opposed to the surveyed value that is modelled by geopnt. If this is correct, then it better maps as an annotation in AIXM 5.1. Having two associations with ElevatedPoint, one for a real value and one for a rounded value could be confusing. Otherwise, why only here and not also for THR, ARP and other surveyed points? | urn:aero:airm:1.0.0:LogicalModel:Abstract:Entity@annotation |
| 18 | hdatum | x | x | x | x | Note: calculated from CRS on referencePoint.ElevatedPoint | urn:aero:airm:1.0.0:LogicalModel:Abstract:GeoEnabledEntity@position   |
| 19 | vdatum | x | x | x | x | referencePoint.ElevatedPoint.verticalDatum | urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:ThreeDimensionalPointType@verticalDatum   |
| 20 | spheroid | x | x | x | x | Note: calculated from CRS on referencePoint.ElevatedPoint | urn:aero:airm:1.0.0:LogicalModel:Abstract:GeoEnabledEntity@position   |
| 21 | project | x | x | x | x | Note: calculated from CRS on referencePoint.ElevatedPoint | urn:aero:airm:1.0.0:LogicalModel:Abstract:GeoEnabledEntity@position   |
| 22 | geopnt | x | x | x | x | location.ElevatedPoint | urn:aero:airm:1.0.0:LogicalModel:Abstract:GeoEnabledEntity@position   |
Status: Published