...
The mapping is limited to particular certain data items of PANS-AIM. For this purpose 3 , three categories of data items have been defined:
1. Minimum Data Items:
According to PANS - AIM chapter 5.3.3.1.1 the AIP data set shall include data about the following subjects, with the properties indicated in brackets being included as a minimum (if applicable):
a) ATS airspace (type, name, lateral limits, vertical limits, class of airspace);
b) Special activity airspace (type, name, lateral limits, vertical limits, restriction, activation);
c) Route (identifier prefix, flight rules, designator);
d) Route segment (navigation specification, startpoint, endpoint, track, distance, upper limit, lower limit, MEA, MOCA, direction of cruising level, reverse direction of cruising level, required navigation performance);
e) Waypoint – - en-route (reporting requirement, identification, location, formation);
f) Aerodrome/Heliport (location indicator, name, designator IATA, served city, certified ICAO, certification date, certification expiration date, control type, field elevation, reference temperature, magnetic variation, airport reference point);
g) Runway (designator, nominal length, nominal width, surface type, strength);
h) Runway Direction (designator, true bearing, threshold, TORA, TODA, ASDA, LDA, rejected TODA);
i) FATO (designation, length, width, threshold point);
j) TLOF (designator, centre point, length, width, surface type);
k) Radio navigation aid (type. , identification, name, aerodrome served, hours of operation, magnetic variation, frequency/channel, position, elevation, magnetic bearing, true bearing, zero bearing direction).
...
2. Conditional Data Items
In addition, also those sections which are marked with #AIP-DS# in PANS-AIM Appendix 2 "Contents of the Aeronautical Information Publication (AIP)" are taken into account for the mapping.
...