ActuallyIn fact, TACAN is not covered by PANS-AIM, as it is considerd considered as military facility, which is not under civil autority authority (and thus also not covered by ICAO Annex 10, Aeronautical Telecommunications).
However, as a TACAN may be used for navigation purposes for civil aviation, and in some states it is also published in the civil AIP, and is defined in ARINC 424
(VHF Navaid Section (D) and TACAN-Only NAVAID Record (DT)), it is also covered by this coding guidelines.
...
The diagram below shows the AIXM classes, including the relevant data types and code lists, needed to encode that information. The main class is the TACAN which is a specialisation of the NavaidEquipment.
TACAN Designator & Name
In general, a TACAN will carry a three letter character identifier. The TACAN.designator attribute is used to code that data.
...
See topic Basic Data for Navaid.
Hours of Operation
See topic Hours of Operation for Navaid.
TACAN Channel
The channel of the TACAN system is coded using the TACAN.channel attribute.
The corresponding data type CodeTACANChannelType contains a list of values from '1X' to '126Y'.
Info | ||
---|---|---|
| ||
A change proposal (AIXM-543) for the next AIXM 5.2 version has been approved by the AIXM Change Control Board, where the attribute tuningFrequencyVHF is added. The coding guidelines provided here are aligned with forward/backward conversion rules contained in the AIXM-543 Change Proposal. |
Position
See topic Navaid Position & Elevation.
Elevation
As the TACAN provides distance information, the elevation of its antenna is relevant. It is coded using for the TACAN.location using the ElevatedPoint.elevation attribute.
Note | ||
---|---|---|
| ||
The ElevatedPoint.elevation for the Navaid.location has not to be coded. |
As TACAN is not covered by PANS-AIM, no accurcy accuracy value is defined for its elevation. However, AIXM provided provides the possibility to code it using the ElevatedPoint.verticalAccuracy attribute.
...
The angular difference between the direction of the 'zero bearing', indicated by the station and the direction of the True North at the time the VOR station is calibrated, is coded by the attribute TACAN.declination.
Warning | ||
---|---|---|
| ||
TACAN does not have an attribute for "zero bearing direction". Workaround AIXM 5.1(.1): Code a corresponding Note. Status AIXM 5.2: to be reported to AIXM CCB. |
Operating Authority
See topic Operating Authority for Navaid.
Facility Coverage
See topic Facility coverage.
Navaid Collocation
See topic Landing Systems & Navaid Collocation.
Coding
...
Coding Examples
...
Examples
Coding examples can also be found in the Sample AIP Data Set (DONLON).
No. | Description | XPath Expression |
---|---|---|
NAV-EX-01 TCN-EX-01 | VOR/DME | //aixm:NavaidTimeSlice [@gml:id ='NAVTSOSTO'] | //aixm:TACANTimeSlice [@gml:id ='TACANOSTO'] |